2. CRF's Only Forums
  3. CRF's Only - Site Discussion
  4. Photo Album
  5. how do u scan a x-ray?
Post Reply
Topic tools
13 posts Page 1 of 1
how do u scan a x-ray?
  • honda_rules_2005
    Posts:83
    Joined:Wed Nov 16, 2005 10:41 pm
    how do u scan a x-ray?

    by honda_rules_2005 » Tue Jan 17, 2006 7:35 pm

    i have a scanner and try scanning my x-rays and noth shows is there a trick too it? :idea:
    07 CRF450X
    Pro cercuit T-4 system.
    JD jetting kit,
    Hotcams stage 2 cam,
    CP 13:01 piston,
    Head modified with oversized Billet titanium CRN couted valves allround, ampco45 copper seats and guids with spring set.& also heavilly ported.
  • User avatar
    crfsonly
    Owner
    Posts:9651
    Joined:Thu Apr 01, 2004 3:45 pm

    by crfsonly » Tue Jan 17, 2006 8:15 pm

    unfortunately there's not an easy solution to this. i've heard of people putting a mirror on top of the x-ray when it's laying down on the scanner. this will likely give you and image that's better but not perfect. they other method that might work is put it on a light table and just take a digital picture of it.

    good luck...ken
  • honda_rules_2005
    Posts:83
    Joined:Wed Nov 16, 2005 10:41 pm

    by honda_rules_2005 » Tue Jan 17, 2006 10:12 pm

    heres a pic my right
    Image
    07 CRF450X
    Pro cercuit T-4 system.
    JD jetting kit,
    Hotcams stage 2 cam,
    CP 13:01 piston,
    Head modified with oversized Billet titanium CRN couted valves allround, ampco45 copper seats and guids with spring set.& also heavilly ported.
  • honda_rules_2005
    Posts:83
    Joined:Wed Nov 16, 2005 10:41 pm

    by honda_rules_2005 » Tue Jan 17, 2006 10:14 pm

    And my left
    Image
    07 CRF450X
    Pro cercuit T-4 system.
    JD jetting kit,
    Hotcams stage 2 cam,
    CP 13:01 piston,
    Head modified with oversized Billet titanium CRN couted valves allround, ampco45 copper seats and guids with spring set.& also heavilly ported.
  • User avatar
    124
    Posts:3704
    Joined:Wed Feb 16, 2005 1:37 pm

    by 124 » Wed Jan 18, 2006 5:16 am

    Ouch. How did you...well never mind. :lol:
    70' Honda CT70 (Trail 70; Gold)
    16' KX450
    16' KX85
    12' YZ125
  • User avatar
    crfsonly
    Owner
    Posts:9651
    Joined:Thu Apr 01, 2004 3:45 pm

    by crfsonly » Wed Jan 18, 2006 7:17 am

    nice trip to the hardware store! hopefully you don't travel airlines for a living.

    did the mirror trick work?

    ken
  • User avatar
    oldtimer
    Posts:149
    Joined:Fri Sep 30, 2005 6:01 pm

    by oldtimer » Wed Jan 18, 2006 7:41 am

    Dam! I bet that wasn’t any fun at all!
    06 CRF230, BBR F&R Springs, BBR Triple Clamp and Link,BBR skidplate and cam cover, RSW fork brace, Pro Taper Fat bars, Ready Filters, Power up Kit, Airbox Mods and Trail Tech.
    06 CRF80
    04 CRF70
    88 CR250
  • honda_rules_2005
    Posts:83
    Joined:Wed Nov 16, 2005 10:41 pm

    by honda_rules_2005 » Thu Jan 19, 2006 3:38 am

    crfsonly wrote:nice trip to the hardware store! hopefully you don't travel airlines for a living.

    did the mirror trick work?

    ken


    No but the digital camera worked, i made my computer backgroung white and put my x-ray over the screen and took a photo.
    I broke my wists doing a 75ft double and did'nt make it the last time and went into the landing ramp. I did that in August and wont be riding till maybe April. :(
    07 CRF450X
    Pro cercuit T-4 system.
    JD jetting kit,
    Hotcams stage 2 cam,
    CP 13:01 piston,
    Head modified with oversized Billet titanium CRN couted valves allround, ampco45 copper seats and guids with spring set.& also heavilly ported.
  • honda_rules_2005
    Posts:83
    Joined:Wed Nov 16, 2005 10:41 pm

    by honda_rules_2005 » Thu Jan 19, 2006 3:42 am

    CR250oldtimer wrote:Dam! I bet that wasn’t any fun at all!


    No it wasn't.
    it was very painful.
    I will have to invest in some sort of wrist braces before riding again. ;)
    07 CRF450X
    Pro cercuit T-4 system.
    JD jetting kit,
    Hotcams stage 2 cam,
    CP 13:01 piston,
    Head modified with oversized Billet titanium CRN couted valves allround, ampco45 copper seats and guids with spring set.& also heavilly ported.
  • honda_rules_2005
    Posts:83
    Joined:Wed Nov 16, 2005 10:41 pm

    by honda_rules_2005 » Thu Jan 19, 2006 3:46 am

    Hve a look at this x-ray before being fixed, i did this back in 2002.
    Image
    07 CRF450X
    Pro cercuit T-4 system.
    JD jetting kit,
    Hotcams stage 2 cam,
    CP 13:01 piston,
    Head modified with oversized Billet titanium CRN couted valves allround, ampco45 copper seats and guids with spring set.& also heavilly ported.
  • 05-230f
    Posts:1
    Joined:Mon May 08, 2006 7:58 pm

    by 05-230f » Sat May 27, 2006 10:58 pm

    That kinda reminds me of my trip to the hardware store when I took a spill on my KX250.

    [img][img]http://img96.imageshack.us/img96/3064/27d86yj.th.jpg[/img][/img]
  • Aussiecrf230
    Posts:1964
    Joined:Fri Jan 06, 2006 11:11 pm

    by Aussiecrf230 » Sun May 28, 2006 5:14 am

    Looks like the article from the June issue of Australasian DIRT BIKE.

    We should all have wrist and knee braces before we do any riding, not after we hurt ourselves.But.......

    Poor bloody bike though I bet it didn't fair to well after this....and not one picture.
    Ray
    Australia

    CRF230F 2004
    C30F Power Up needle
    Mains 132
    Idle 45
    2 turns out
    Baffle out, Screens In

    It starts,it runs,it gets to where all CRFs can get to without the valve or valve plate dramas
  • BRRRAP
    Posts:6
    Joined:Wed Dec 13, 2006 1:26 pm

    by BRRRAP » Wed Dec 13, 2006 1:47 pm

    CRF'S TEND NOT TO BUCK OFF RIDERS LIKE THE UGLY GREEN MACH. #-o
Post Reply
Topic tools
13 posts Page 1 of 1

Who is online

Users browsing this forum: No registered users and 1 guest

  2. CRF's Only Forums
  3. CRF's Only - Site Discussion
  4. Photo Album
  5. how do u scan a x-ray?
Jump to