Page 1 of 1

Stock Handlebar specs

Posted: Thu May 28, 2020 5:56 pm
by tbarnard67
Anyone know the stock handlebar specs? I'm looking for some taller bars but want to make a comparison.

Re: Stock Handlebar specs

Posted: Thu May 28, 2020 9:17 pm
by JimDirt
Welcome to the site !! \:D/

Don't quote me on this , but I "think" they use the standard Honda 7/8" bend that has been on the CRF's for years , either way , you can take these measurements , compare them to your bars and it will tell you ....... Report back with findings , as it might help someone else out ..... ;)

Renthal 971

width= 802mm - (appx.) 32.25in.

height= 99mm - appx. 3 7/8in.

rise = 65mm - appx. 2 9/16in.

clamp width = 200mm - appx. 7 7/8in.

sweep/pullback = 54mm - appx. 2 1/8in.