Page 1 of 1
Knowledge of hose
Posted: Tue May 29, 2007 12:28 pm
by NCLR1
OK, I did another valve check yesterday but I was rushing it. I need help identifying a hose that was connected to a clip that is attached to the breather hose. It's about 1/4 inch and is open on the end close to the breather. I just want to make sure that it doesn't connect to anything. Thanks
Posted: Tue May 29, 2007 2:55 pm
by Ray
The breather hose is connected to the valve cover. There is a smaller hose that is located above the breather hose and is supported by the breather hose with a plastic clip at the upper engine mount/bracket. The smaller tube remains open ended at the top.
Posted: Tue May 29, 2007 3:01 pm
by NCLR1
Thanks for the info. I thought that was right.