Valve guide reamer
  • magicjuice
    Posts: 6
    Joined: Sat May 01, 2010 7:25 am

    Valve guide reamer

    by magicjuice » Sat Aug 11, 2018 3:42 pm

    Hi everyone
    I'm looking for valve guide reamer for my crf150r.it's 4.5mm (0.1760in)
    Does anyone have an idea where I can buy ?thanks
  • Aussiecrf230
    Posts: 1962
    Joined: Fri Jan 06, 2006 11:11 pm

    Re: Valve guide reamer

    by Aussiecrf230 » Sat Aug 11, 2018 6:29 pm

    You could try an engineering supplies shop.
    Have you installed new guides?
    Have you ever reamed guides before?
    You will have to check/recut valve seats if you ream guides to ensure everything mates up properly.
    Might be easier to get a shop to do the lot.
    Ray
    Australia

    CRF230F 2004
    C30F Power Up needle
    Mains 132
    Idle 45
    2 turns out
    Baffle out, Screens In

    It starts,it runs,it gets to where all CRFs can get to without the valve or valve plate dramas
  • magicjuice
    Posts: 6
    Joined: Sat May 01, 2010 7:25 am

    Re: Valve guide reamer

    by magicjuice » Sun Aug 12, 2018 9:45 am

    Everything is almost ready in place.I have done this job again of course.the think is i cant find reamers on these size which i can trust.

Who is online

Users browsing this forum: No registered users and 3 guests