Honda CRF 150R issue, need help
  • Xain
    Posts:2
    Joined:Sun Jan 28, 2018 2:11 pm
    Honda CRF 150R issue, need help

    by Xain » Sun Jan 28, 2018 2:15 pm

    We have changed all of the parts that could have been an issue with it running for a few minutes, then cutting out, and its still doing the same thing. we've tried changing the jets, and that hasn't changed anything. We have no clue what else it could be, we checked and replaced everything you could think of.
  • Aussiecrf230
    Posts:1964
    Joined:Fri Jan 06, 2006 11:11 pm

    Re: Honda CRF 150R issue, need help

    by Aussiecrf230 » Sun Jan 28, 2018 10:13 pm

    Have you ruled out an ignition problem?
    Ray
    Australia

    CRF230F 2004
    C30F Power Up needle
    Mains 132
    Idle 45
    2 turns out
    Baffle out, Screens In

    It starts,it runs,it gets to where all CRFs can get to without the valve or valve plate dramas
  • Xain
    Posts:2
    Joined:Sun Jan 28, 2018 2:11 pm

    Re: Honda CRF 150R issue, need help

    by Xain » Mon Jan 29, 2018 6:21 am

    Have you ruled out an ignition problem?
    It runs well for a minute, and then starts to cut out, we've tried changing the jets as well and it changes nothing.

    Edit:We had already replaced everything we could, including the ignition as the previous post says.
  • Aussiecrf230
    Posts:1964
    Joined:Fri Jan 06, 2006 11:11 pm

    Re: Honda CRF 150R issue, need help

    by Aussiecrf230 » Tue Jan 30, 2018 1:33 am

    Does this happen idling or when moving?
    How does it idle?
    What jetting do you have and is your aircleaner clean?
    Where is the fuel screw set?
    How does it run with the fuel cap off.
    It sounds like either the fuel is not geting to the carb or electric issue.

    What ignition parts did you replace?

    Does it restart again straight away after it stops?
    A lot of questions I know but trying to get to know your bike.

    Is this a new problem or has it been this way since you had the bike.
    Ray
    Australia

    CRF230F 2004
    C30F Power Up needle
    Mains 132
    Idle 45
    2 turns out
    Baffle out, Screens In

    It starts,it runs,it gets to where all CRFs can get to without the valve or valve plate dramas

Who is online

Users browsing this forum: No registered users and 1 guest