Page 1 of 2
Controls and ergonomic modifications
Posted: Fri Feb 17, 2006 8:03 am
by crfsonly
Please use this thread to discuss controls. Which would include handlebar, perches, shift lever, rear brake pedal, stabilizer, triple clamp, etc. Erognomics should also be discussed here.
Posted: Fri Feb 17, 2006 8:43 am
ProTapers
Scotts Damper
Red Applied triple clamp with Scotts mount
Works Elite clutch perch
Cycra ProBends
IMS pegs
Hammerhead shifter and tip
Zip=Ty axle blocks,almost forgot !
Doug
Posted: Fri Feb 17, 2006 8:58 am
by RottenRob
The zip-ty axle blocks are great because they stay in position when doing a tire change and they also come with a handle that helps pull out the axle.
Posted: Fri Feb 17, 2006 10:59 am
by juanocp
ASV levers + Doug's stuff
Posted: Fri Feb 17, 2006 11:59 am
by Smash
juanocp wrote:ASV levers + Doug's stuff
Except I'm chaning the vote to fastaway pegs. And don't forget those ASV master cylinder and clutch perch clamps.
Posted: Fri Feb 17, 2006 12:17 pm
by whiteman
-BRP sub mount scotts for sure
-Tag X1 bars
-spider grips oversized
-AVS stuff is nice but with the rekluse is kind of a waste for the clutch side. Just get the sliding clamps.
-fastway pegs
-hammerhead shiter and tip
-gripper seat cover
-CRFSOnly gripper graphics
Would the Rekluse go here? If so it is a must for fun factor....
Posted: Fri Feb 17, 2006 1:28 pm
by Ernie Pezz
ProTapers, Scotts Damper, BRP sub mount w/ Pro Taper bars. Applied triple clamp or the BRP black clamps! I agree with Doug on most of this stuff. New Pegs, shifter, and axle blocks. Oh yea the Rekluse too. Good ideas Doug. Ernie
Posted: Fri Feb 17, 2006 3:34 pm
by uniped
Pertaining to controls and ergo's
Red Applise triples
Rekluse cluth parts
Jet Black ProTapers(I did not remember you sold these)
Joker throttle
Renthal Grips (Blk/Gry)
Billet throttle tube
Black Acerbis rally pro
Scotts stablizer
Fastway pegs(again nice adjustable angle)
Fastway cable clip
SDG seat (do you sell these?)
Hammerhead shifter
Scott
Posted: Fri Feb 17, 2006 5:26 pm
by crfsonly
keep in mind that to use the BRP SUB mount you can not use the Applied triples.
ken
Posted: Fri Feb 17, 2006 8:10 pm
by whiteman
use the brp triples in black...
Posted: Fri Feb 17, 2006 8:48 pm
by JoePezz
ProTaper CR High or Woods High (Black)
Scotts Stabilizer
BRP Sub Mount
BRP Triple Clamps
Fastway Footpegs
Hammerhead Shift lever
Cycra Pro Bend (Triple Clamp Mounted)
Posted: Sat Feb 18, 2006 6:00 am
by OLDFATGUY
How about a set of swivel pegs? I have read a couple favorable test on them. There are two makerS right now POWERPEGZ and I think the other is PIVOT PEGS the power pegs do not self center like, when you get off the bike. The PIVOT PEGS do. They are on my list for my bike. OFG
Posted: Sat Feb 18, 2006 7:52 am
by crfsonly
i ride with them on my R and like them.
ken
Posted: Sat Feb 18, 2006 4:55 pm
by Troyss
GPR vs2 would be my nomination for steering damper. I recently ordered a Scotts for my new bike not knowing anything about the GPR. The next day I came across the GPR and did some quick research on it. I swiftly cancelled my Scotts order after I learned that the GPR was a better fit for me.
Here is why I chose the GPR v2.
Great support – they will fix for free if unit ever malfunctions.
I love the sub mount design – safer and very clean looking.
Damper is built into bar mounts – Theft resistant
Choice of colors – red, black, blue, gold, orange
Upgradeable – If you buy a new bike and it doesn’t fit or want to upgrade, GPR will take trade-in on you new damper.
For tall riders v2 raises bars 1†and moves forward 5cm
One dial adjustment is easy. While riding I can easily change settings.
I now have 2 rides and 135 miles testing and I love it.
Finally, Its so beautiful!
[url]http://community.webshots.com/myphotos?action=showPhoto&albumID=547732453&photoID=2273460760064839162&security=tTHQMa
Posted: Sat Feb 18, 2006 6:38 pm
by Ted
I agree with the GPR. Ease of operation. More choices of color to add BLING.
