150 Torque settings
  • KrackerJack
    Posts: 2
    Joined: Tue Oct 19, 2021 12:46 am

    150 Torque settings

    by KrackerJack » Thu Jan 06, 2022 10:28 pm

    Hi all, I'm finishing off a resto on my boys 150, and chasing frame torque settings.

    Searched but not much luck, is there a tech data section?

    Cheers in advance, :)
  • Aussiecrf230
    Posts: 1962
    Joined: Fri Jan 06, 2006 11:11 pm

    Re: 150 Torque settings

    by Aussiecrf230 » Mon Jan 10, 2022 12:39 pm

    Hi KrackerJack and welcome to the site.

    Is this a 150F or 150R?

    What year is the bike and can you be a little more specific on what frame bolts require torquing.

    Just need to be sure whoever answers has correct info.
    Thanks
    Ray
    Australia

    CRF230F 2004
    C30F Power Up needle
    Mains 132
    Idle 45
    2 turns out
    Baffle out, Screens In

    It starts,it runs,it gets to where all CRFs can get to without the valve or valve plate dramas

Who is online

Users browsing this forum: No registered users and 2 guests