CRF's Only Forums

Am I able to put a 2019 450 motard kit on a 2019 250L?

Has oversize disc and after market rear, fits 2017-2019 450R. Got adaptor for 2017 front brake caliber and comes with front and rear sprocket 15 and 45.

Many thanks

Welcome to the site !!

About the only way you are going to know is to test fit the wheels .... I am thinking the front wheel will work , but the rear might be a issue , but I am not sure , as the width on the hub at the sprocket is different on the 17-21 R/RX , so the rear sprocket is offset around 3.75mm on the R from the older gen bikes , not sure if they carried that change in setup over to the L .... but that is where I think you would have a issue , the only other possible issue may be the axel diameter in the front ... especially being a 250 , the axel and fork lugs may be different/smaller .... so , honestly the only way to find out , is to test fit .... maybe if you have a friend that has a late model R or RX (17-21) maybe he would let you do a test fit , either by placing your wheels on his bike , or his wheels on yours ... As I am not aware of anyone who has tried this setup ...