CRF's Only Forums

I jetted my bike yesterday with the DynoJet kit stage two(1176)and it runs absolutely great!
The problem is, fuel keeps leaking from the carb drain hose. I never noticed this before so I'm not sure if I did anything to cause it.
From what I've read it sounds like a stuck float. Any suggestions on fixing this? I was thinking about spraying carb cleaner in the fuel line and let it sit for a while and then tap the carb with the handle of a screw driver.
Wondering if I should just bite the bullet and take it to the dealer and have them rebuild it. Any suggestions?

take off the carb, pull the bowl off and the float. There is a spring loaded plunger, it looks like a square torpedo. Clean that. Sometimes a little dirt can get in there. Try cleaning it yourself first and save some money. Then take it somewhere to have them take a look at it.

That was it! There was a little ball of varnish keeping the float valve from closing the hole all the way. Hit it with carb cleaner and problem solved. Thanks!