[dsrpilot]

Searched the forum for some jetting recommendations for a CRF80 and found a few, but they were a little old.

Checking to see if the info in this thread is still current.
http://www.crfsonly.com/forum/viewtopic.php?t=11825

Here they recommend a 100 main jet and leaving the pilot at stock. We ride mostly between 900-1400 ft. and the bike is bone stock right now. I'm planning on putting in some airbox vents, and putting a couple of holes through the exhaust baffle.

I'd like to do whatever jetting is required to give the bike a little more oomph. (Yes, a bigger bike is next).

Are these suggestions from 2007 still current and accurate or might there be other thoughts on the matter?

Thanks in advance for your reply...