[killab18]

hey whats up. im having a problem with the bike not being able to idle.

mods are pro circuit exhaust and twinair filter without screen.

i ride at 0-500ft elevation here in NY.

i have a #42 pilot and #168 main right now. i had to turn screw out 3 turns to get it to somewhat idle and run.

So i know i have to jump up sizing but to what?
like a #45 and #170

also would moving the clip down a notch help out with my jets i have now?

[jjrace]

I assume you know the basics of a carb.

Pilot does 0-1/4, needle 1/4-3/4 and main at 3/4-WOT

So why would you mess with the needle and main if you are having idle issues?

3 turns out, you need to go up to at least a 45 if not a 48 pilot. Then get the fuel screw back to 1.5-2.5 turns out.