CRF's Only Forums

Posted: **Sat Dec 29, 2007 4:40 pm**

someone posted that there were pics on a particular thread that displayed the location of different jets, ive been unable to find this, does anyone know where i can locate this post?

Posted: **Sat Dec 29, 2007 6:29 pm**

~ posted that picture.

Posted: **Sat Dec 29, 2007 6:42 pm**

I found it here it is..

Posted: **Sat Dec 29, 2007 11:10 pm**

THANK YOU VERY MUCH, IM ASSUMING THE FLOAT BOWL MUST COME OFF TO ACCESS THE PILOT JET THEN?

Posted: **Sat Dec 29, 2007 11:30 pm**

terex26 wrote:THANK YOU VERY MUCH, IM ASSUMING THE FLOAT BOWL MUST COME OFF TO ACCESS THE PILOT JET THEN?

I think you can get to them by removing the bowls drain plug only. I took off the bowl though.

Posted: **Sun Dec 30, 2007 4:58 am**

I think you can get to them by removing the bowls drain plug only

You sure can. The float bowl doesn't have to come off for any re-jetting we do except for the leak jet I believe. Doug

Posted: **Sun Dec 30, 2007 10:44 am**

sweet, im new to the fcr carb so im gald its not to involved of a process, thanks for the tips!

Posted: **Sun Dec 30, 2007 6:54 pm**

how difficult is it to install a fuel screw?
do you just unscrew the old one.,transfer washer/seal and screw all the way in,then out 2 turns..approx.. or am i missing something

Posted: **Mon Dec 31, 2007 6:00 am**

That's all there is to it, the o-ring,spring and washer.
Sometimes the evil o-ring will stay up in the carb,and be careful any of the parts don't fall out and go into the black hole. Doug

Posted: **Mon Dec 31, 2007 6:17 am**

Thanks

CRF's Only Forums

jetting pics

jetting pics