[terex26]

someone posted that there were pics on a particular thread that displayed the location of different jets, ive been unable to find this, does anyone know where i can locate this post?

[CRF916]

~ posted that picture.

[CRF916]

I found it here it is..

[terex26]

THANK YOU VERY MUCH, IM ASSUMING THE FLOAT BOWL MUST COME OFF TO ACCESS THE PILOT JET THEN?

[CRF916]

THANK YOU VERY MUCH, IM ASSUMING THE FLOAT BOWL MUST COME OFF TO ACCESS THE PILOT JET THEN?

I think you can get to them by removing the bowls drain plug only. I took off the bowl though.

[[email protected]]

I think you can get to them by removing the bowls drain plug only

You sure can. The float bowl doesn't have to come off for any re-jetting we do except for the leak jet I believe. Doug

[terex26]

sweet, im new to the fcr carb so im gald its not to involved of a process, thanks for the tips!

[Zish]

how difficult is it to install a fuel screw?
do you just unscrew the old one.,transfer washer/seal and screw all the way in,then out 2 turns..approx.. or am i missing something

[[email protected]]

That's all there is to it, the o-ring,spring and washer.
Sometimes the evil o-ring will stay up in the carb,and be careful any of the parts don't fall out and go into the black hole. Doug

[Zish]

Thanks