CRF's Only Forums

ok i installed a 170 main jet took the clip on the needle to the 2nd pos and i adjusted my pilot to 1 3/4 no my issue is when the choke is on it runs like normal low idle speed. if i have it choked and pull the hot start it runs like it normally should with the choke on higher idle speed. if i close the choke its dies unless i give it gas. at 1/4 to full throttle it runs like it should it just wont idle or stay idling what is my next step i played with the pilot full range and i needing a smaller slow jet or bigger or some kind of air jet im not gettin or what

i brought the bike from tx and now live in colorado and also has a t- full exhaust im just at a loss on what i should do

Your pilot (slow) jet is clogged. Remove and clean thoroughly.

no its not clogged none of the jets are clogged at all no passageways are blocked everything is all nice and clean