[seth_riggle]

im looking for jets for crf80f and does anybody know what to gap the plug at?

[turnerc]

I ordered jets for our 2006 CRF80 here's what I ordered:
1- Adjustable Needle Set Part #16012-GN1-A41
1- Screw Set Part #16016-143-620
1- Main Jet #100 Part #99101-116-1000

The adjustable needle was to replace the stock one which is not adjustable. I set the new one on the second clip from the bottom. I ordered the screw set to replace the stock air screw with a normal slotted head screw. The air screw was set to 1-1/2 turns out. I replaced the main jet with the #100. The stock pilot jet was #35 and I left it the same.
The baffle was also removed from the exhaust and I put an aluminum tip in its place.
I run my spark plug gap at .028 to .030

Hope this helps!
I know our CRF80 runs 100% better now.
Turnerc

[tibs]

I ordered jets for our 2006 CRF80 from http://www.servicehonda.com
Here's what I ordered:
1- Adjustable Needle Set Part #16012-GN1-A41
1- Screw Set Part #16016-143-620
1- Main Jet #100 Part #99101-116-1000


Turnerc

will the adjustable needle and screw set fit a 07 crf70f?

and with the screw set how did you get the old one out?

[baddlord777]

I ordered jets for our 2006 CRF80 from http://www.servicehonda.com
Here's what I ordered:
1- Adjustable Needle Set Part #16012-GN1-A41
1- Screw Set Part #16016-143-620
1- Main Jet #100 Part #99101-116-1000

The adjustable needle was to replace the stock one which is not adjustable. I set the new one on the second clip from the bottom. I ordered the screw set to replace the stock air screw with a normal slotted head screw. The air screw was set to 1-1/2 turns out. I replaced the main jet with the #100. The stock pilot jet was #35 and I left it the same.
The baffle was also removed from the exhaust and I put an aluminum tip in its place.
I run my spark plug gap at .028 to .030

Hope this helps!
I know our CRF80 runs 100% better now.
Turnerc

Where on Honda are you locating adjustable set(s) etc ? I thought honda was strictly stock Factory parts ? Or did you call them ?

[2stroke]

I ordered jets for our 2006 CRF80 from http://www.servicehonda.com
Here's what I ordered:
1- Adjustable Needle Set Part #16012-GN1-A41
1- Screw Set Part #16016-143-620
1- Main Jet #100 Part #99101-116-1000

The adjustable needle was to replace the stock one which is not adjustable. I set the new one on the second clip from the bottom. I ordered the screw set to replace the stock air screw with a normal slotted head screw. The air screw was set to 1-1/2 turns out. I replaced the main jet with the #100. The stock pilot jet was #35 and I left it the same.
The baffle was also removed from the exhaust and I put an aluminum tip in its place.
I run my spark plug gap at .028 to .030

Hope this helps!
I know our CRF80 runs 100% better now.
Turnerc

[MauiCRF450Rider]

I ordered jets for our 2006 CRF80 from http://www.servicehonda.com
Here's what I ordered:
1- Adjustable Needle Set Part #16012-GN1-A41
1- Screw Set Part #16016-143-620
1- Main Jet #100 Part #99101-116-1000


Turnerc

will the adjustable needle and screw set fit a 07 crf70f?

and with the screw set how did you get the old one out?

I just ordered the needle set and screw set off the '05 CRF80f schematic for my son's 2012 CRF80F and everything fit as expected.

I did however purchase the Main jet from the aftermarket listing instead of the OEM list as it has more options, and cost was better.