[Wantabe]

Very basic I know, but I understand there is a proper sequence to tightening the axel nut and pinch bolts on the front wheel so unusual stresses are not placed on the front forks. Any suggestions?

[gal8x]

Install the axel holder with the “up” mark, up. Loosely tighten the 4 holder nuts.
Grease and install the axel, torque for a 230 is 54 lbf.ft.
Hold the front break and pump the forks to set the axel.
Tighten the holder nuts. Torque for a 230 is 9 lbf.ft