CRF's Only Forums

if i read correctly off of Race Tech's website, the stock suspension springs rates are .72kg/mm front and 6.4kg/mm rear. if my conversion is correct, that would be 7.06N front and 62.76N rear. Something doesn't look right........
could someone confirm or deny this, please?

Welcome to the site !!

Yea those numbers are correct , only difference being is you would list it as 0.72kg (not.72 , *just a formality**) and 6.4 , but otherwise , yes the conversion is correct ... I alway have to pay attention when looking at spring rates online to make sure if they are kg. or Nm. when listed , then try to convert it ..... my source was/is https://norwestsuspension.com/convert-spring-rates , as it will give you pretty much any conversion you may run across as far as spring rate values ..... Hope that helped