[daluk]

Hi Guys,

Out on the bike today (for the first time) and when loading up the front end going into a burm (quite quick) the front end had loads of chatter!

Is this just a matter of setting it up right?

Cheers,

Dal

[DarkCRF]

If you have one, add some click on the Steering damper

Bike model and year ?

[daluk]

its an 08 crf250r. Its more the forks bouncing up and down. This only happened in 1 turn which is down hill into a burm on the brakes.

[DarkCRF]

Did you try to fix it with the clicker ?

[daluk]

no, I wouldnt know where to start!

[DarkCRF]

First of all, set your sag. Something between 100 and 105 mm.

Find a place where the trouble is evident and remove 3 click of compression. Try it again, if you see some improvement continu this way until you feel you don't help it anymore. At this point fine tune it with 1 click up or down at time.

If you didn't see improvement in the first step, try by come back in the original position and add 3 more click. Continu like a explain below.

After it, do the same thing with your rebound clicker.

When you finish to adjust the reboud, reajust the compression the same way from the beginning

[daluk]

Thanks for the advice...!!!

I will give it a go and let you know!.. Great bike though!

Chopped in my 125 smoker and its the best thing I could have done. People say smokers are more fun??!! I had more fun today than I ever had on the 2T.

Thanks again for your help!

Dal