CRF's Only Forums

Posted: **Mon Mar 16, 2009 11:12 am**

Does anybody know the ajustment on the front and rear suspension on a stock CRF250R 07 Rider weight is 135

Posted: **Mon Mar 16, 2009 11:39 am**

Are you wanting the stock settings or a certain setting? alot of varibles here. Woods, Desert, MX, A,B,C, or D class rider? Service manual will give the stock settings.

Posted: **Mon Mar 16, 2009 11:43 am**

PM sent.

Posted: **Mon Mar 16, 2009 2:12 pm**

Looking for settings for MX not stock Thought someone has Ideal setting for a 135 rider and what air pressure to run on a semi soft track a freind is going to race for the first time trying to get bike setup as good as possible

Posted: **Tue Mar 17, 2009 8:08 am**

The Stock CRF250R is a MX racebike. (Race-ready). The stock settings are pretty good. The manual shows how to set up race sag and make adjustments for conditions. For 135lb rider lighter springs are needed, and a re-valved suspension is not a bad idea, if you have the money to spend to do it right. Typical settings for a spring that is too heavy would be to soften the comp. and stiffen the rebound, it's explained in the manual. Air pressure should be set to zero, blead the air out on a regular basis, it will pressurize with use. Read the manual, one persons set-up doesn't necessarily work for another. All the baseline settings will require fine tuning for rider ability, weight, track cond. Experiment with different settings and have fun.

Posted: **Tue Mar 17, 2009 8:33 am**

Thanks for the Info Dave

Posted: **Sat Mar 28, 2009 9:27 am**

definitely lighter fork springs. . .

Posted: **Mon Jul 27, 2009 7:03 pm**

How light ? I'm 135 i just ordered .38 front springs and 4.6 for the rear

CRF's Only Forums

Suspension

Suspension