[Tomato#12]

How do I find what spring rate I should use and what to set my sag to. I'm going to get my suspension re-valved and put in the right rates. Thanks.

[marks crf]

you should set the race sag usually around 10cm

and for the spring
http://www.mx-tech.com/index.php?id=spr ... ght_type=2

just type in your weight (although it comes up with my weight 75kg's)

[Tomato#12]

Haha I looked for a while and didn't find anything until now.Thanks!

[Tomato#12]

Is there any stock rear springs with a rate of 7.3 kg/mm that are inter cangable with mine? I do enduros and hare scrambles and they are 2 different rates for the shcocks. The enduro was 7.3 kg/mm for the shock and the hare scramble was 7.4 kg/mm. So pretty close. I will just go with what ever on I can get my hands on. Thanks.

[marks crf]

7.3kg/mm seems like a really really stiff spring
you don't look that big in the photo

[Asmith]

7.3kg/mm seems like a really really stiff spring
you don't look that big in the photo

No kidding!!!

Tomato...you did something wrong. I run a 6.3 kg/mm on my 450 and I'm pretty damn big.

[Tomato#12]

Oops, My bad I did it twice, I did it on pounds and then on kg's just to see what that would be. I accidentally pasted the kg one Sorry for the incovience. Yeah it now says I'm right on with stock!! My bad! I'm pretty damn dig my self though!!! (not kidding though)

[marks crf]

adjust some clickers to get it just right for you