[ship_killer6666]

On my crf150F 2004, the front fork is REALLY soft, I can almost hear it "bang" when i drop 1 ft!!

the seal aren't leaking, I wanted to know if there is a cheap way to make my fork harder (with air or something)

thank you

ps: sorry if my english is .

[zak13]

add more oil to your forks

[ship_killer6666]

how,

I mean, I'M TOTALLY NOOB in mechanic

I need to know which oil, how much it coast, how to add it into my fork

thank

[.sinner]

First pull the forks from the bikes by loosening the triple clamp bolts and sliding the legs out. Then remove the caps from the forks and pour equal amounts of Honda SS-8 10W fluid in ($7). Its trial and error after that reassemble the forks and put them back in the bike and then test. Repeat the process until the forks are at the level you like.

[zak13]

you can also buy a fork oil tool you can buy it here it looks like a syringe

[zak13]

also you dont have to take the forks off you can just use a wrench to get the top off and add the oil

[ship_killer6666]

thanks, ill try that

one honda ss-8 10w fluid bottle is enought for the two fork?

[.sinner]

It should be if your just adding fluid

[zak13]

if it doenst work get some race suspension

[ship_killer6666]

pay me the racing suspension then

I'm broke dude, Im 14 years old, no money, it's all gone when I bought my 150F

[mustang]

On my crf150F 2004, the front fork is REALLY soft, I can almost hear it "bang" when i drop 1 ft!!

the seal aren't leaking, I wanted to know if there is a cheap way to make my fork harder (with air or something)

thank you

ps: sorry if my english is

read this post on tt it will help you out a lot http://www.thumpertalk.com/forum/showthread.php?p=1940565#post1940565

[zak13]

pay me the racing suspension then

I'm broke dude, Im 14 years old, no money, it's all gone when I bought my 150F

im 13 and broke spent it all on my 100

[zak13]

i have a xr100r i boiught some oil and i want to know how much oil i shoul add to my forks i weigh 150 pounds

[ship_killer6666]

I put 15W in the 2 fork, they really need it

now it is really hard no chance to bottom out,

[zak13]

its not good to put too much i just put too much and did a small jump and it feels like im bottomig out again bec my forks cant move up so now instead of being too soft theyre too hard but i took some out and now they are stiff but can still move a full stroke under a lot of pressure