Tie downs
  • User avatar
    dcrew
    Posts: 173
    Joined: Fri Jan 06, 2006 3:17 am

    Tie downs

    by dcrew » Mon Jun 19, 2006 7:56 pm

    Go to the hardware store an buy Carabeaners (sp) the same size as the hook on your tie down straps.
    Feed them through the loop in the strap that holds the hook and put a zip tie around the carabeaner (sp)
    where it comes closest together to keep it from flopping around. This way you don't have to worry
    about the hook coming off your tiedown point while you are hooking things up.

    Dave
  • User avatar
    edelnero940
    Posts: 13
    Joined: Fri Jun 02, 2006 12:35 pm

    by edelnero940 » Tue Jun 20, 2006 12:30 pm

    good tip. i do the same thing, except i put the caribeaners through the bottom loop of the hook instead of the strap.
  • Thumper950
    Posts: 28
    Joined: Mon Jan 10, 2011 6:30 pm

    by Thumper950 » Mon Jan 10, 2011 8:37 pm

    kewl idea
  • User avatar
    MattBennett23
    Posts: 483
    Joined: Tue Sep 28, 2010 1:05 pm

    by MattBennett23 » Tue Jan 11, 2011 12:26 pm

    I just got a set of Pro Tapers, a little pricy but its holding you $7000 bike. Seems worth it to me!

    http://www.crfsonly.com/catalog/product ... ts_id/3508
  • User avatar
    usmc88fan
    Posts: 1434
    Joined: Fri Dec 29, 2006 8:53 am

    by usmc88fan » Tue Jan 11, 2011 2:06 pm

    MattBennett23 wrote:I just got a set of Pro Tapers, a little pricy but its holding you $7000 bike. Seems worth it to me!

    http://www.crfsonly.com/catalog/product ... ts_id/3508


    On that link, that for a set right? Or individually?
    We have two companies of Marines running rampant all over the northern half of this island, and three Army regiments pinned down in the southwestern corner, doing nothing. What the hell is going on?
  • User avatar
    MattBennett23
    Posts: 483
    Joined: Tue Sep 28, 2010 1:05 pm

    by MattBennett23 » Tue Jan 11, 2011 2:12 pm

    For the set... They are super trick! Just dont take them out of the box until you are ready to use them, you will never get them back in!!
  • User avatar
    usmc88fan
    Posts: 1434
    Joined: Fri Dec 29, 2006 8:53 am

    by usmc88fan » Tue Jan 11, 2011 3:55 pm

    Sweet! Thanks!!
    We have two companies of Marines running rampant all over the northern half of this island, and three Army regiments pinned down in the southwestern corner, doing nothing. What the hell is going on?
  • User avatar
    MattBennett23
    Posts: 483
    Joined: Tue Sep 28, 2010 1:05 pm

    by MattBennett23 » Tue Jan 11, 2011 4:05 pm

    I like them, have only used them once but so far so good. They clip onto the rings so you dont lose your tie down while you are loading a bike into the truck. Swivel so they are easy to keep from getting twisted. They have a soft strap so you dont scratch up your bars, and they are wide, sturdy, and very long and should be able to tie down anything. They also have a velcro strip to wrap around the loose strap after you have loaded so they dont flap around on the x-way. Plus they look good with the Pro Taper logo on them. Much impressed so far...
  • User avatar
    usmc88fan
    Posts: 1434
    Joined: Fri Dec 29, 2006 8:53 am

    by usmc88fan » Tue Jan 11, 2011 7:41 pm

    They sound really nice, and it's good to hear a review from a fellow rider and not some writer somewhere.
    We have two companies of Marines running rampant all over the northern half of this island, and three Army regiments pinned down in the southwestern corner, doing nothing. What the hell is going on?
  • User avatar
    MattBennett23
    Posts: 483
    Joined: Tue Sep 28, 2010 1:05 pm

    by MattBennett23 » Tue Jan 11, 2011 7:50 pm

    Agreed, I prefer a review from someone not getting paid over a magazine anyday. Plus a lot of magazine reviews, these guys aren't your average rider. They ride constantly, have access to any parts they want, and dont think twice about dropping a couple thousand on mods into their bikes. It's nice to hear from folks who ride once a month, have a budget, and need their gear to work!
  • Emileitemn
    Posts: 1
    Joined: Mon Sep 30, 2019 1:28 am

    Tie downs

    by Emileitemn » Sat Oct 12, 2019 7:19 am

    Thanks for the info. Going to check out the frame tie downs that sounds like the way to go. Already doing the triple tree deal. At first I was going to use the F & R crash bars but read its not a good idea. With 2 bikes on the trailer, its pretty tight between them. We have one of the first ramp-free trailers, Im sure theyre better now.
    Thanks

Who is online

Users browsing this forum: No registered users and 1 guest