[bt]

I would like to buy a set of bar mounts that would
allow me to use the stock triple clamps and also move
the bars forward a bit.

need help finding some.

[[email protected]]

Applieds do, so do BRP's, you can pick the amount of rise,pretty slick.
http://www.crfsonly.com/catalog/product ... ts_id/1064

http://www.crfsonly.com/catalog/product ... ts_id/1500

If you go with Applieds and add a steering dampener and want to use the Applied dampener mount it 'll only work with an Applied triple clamp, their width is unique.
If you don't ever plan to have a steering dampener (you really should !) it doesn't matter. Applied makes great stuff,they just use different spacing width for their clamps.
BRP makes great stuff too,and they use standard spacing for their triple clamps. Doug

[bt]

I am wanting to move the bar forward, not up.

thanks

[[email protected]]

Both brands move the bars forward,both are fine products. Doug

[DaveX]

I have the Applied and like them. They do move the bar forward. I also needed them higher so went with the plus 15mm, but as mentioned you can go with stock to keep the same hight.

Dave

[OLDFATGUY]

The stock ones have some front to rear offset, have you tried turning them around? OFG

[bt]

The stock ones have some front to rear offset, have you tried turning them around? OFG

I haven't noticed that. I'll check it right now.

thanks ofg

[bt]

thanks all