Problem installing Roosters
  • wt018
    Posts:10
    Joined:Sat Aug 27, 2005 2:57 am

    by wt018 » Wed Dec 27, 2006 7:17 pm

    i have the unibikers and ran in to the same problem i just but the pump on the back side and ran the bolt in through the other way have not had any problems since then
    05 crf450x twin air intake system,jd jet kit, 170 main, zip ty fuel screw, boyessen apc, fmf header and q2 muffler, rekluse cover, applied triple and pro-tapers,smog block off,unibikers
  • User avatar
    JAWS
    Posts:4449
    Joined:Fri Jun 16, 2006 6:59 am

    by JAWS » Wed Dec 27, 2006 7:50 pm

    Mounted my Flatlands without issue. :) :) :)

    Joe
    Image
    '05 CRF450X,McClain suspension, Cycra Probends, Pastrana FMX Pro Tapers,BRP Sub mount & Scotts stabilizer.See carb sticky for more
  • User avatar
    instigator
    Posts:469
    Joined:Tue Feb 28, 2006 9:57 pm

    by instigator » Wed Dec 27, 2006 8:04 pm

    Wait, let me get in on this!

    I think I wrote somethin about eventually people were gonna have problems installing Roosters!

    Damn, I wish I had more time to stir this pot! Maybe later tonite I can get back to the boards!!

    UNABIKERS RULE!!!!!!!!!!!!!!!!!!!!!!!!
    06' 450X
    pro circuit T-4
    Jd Kit
    smog block-off
    the "works" for guards
    ___________________

    LET'S ROLL!
  • User avatar
    paul turner
    Posts:7578
    Joined:Thu Sep 22, 2005 9:03 pm

    by paul turner » Wed Dec 27, 2006 8:06 pm

    instigator wrote:Wait, let me get in on this!

    I think I wrote somethin about eventually people were gonna have problems installing Roosters!

    Damn, I wish I had more time to stir this pot! Maybe later tonite I can get back to the boards!!

    UNABIKERS RULE!!!!!!!!!!!!!!!!!!!!!!!!


    DITTO!!!!!!!!!!!!!!!!!!!!

    Hurry back Kevin!

    paul
    If you ain't crashin', you ain't ridin' :-)
    Image
  • User avatar
    JAWS
    Posts:4449
    Joined:Fri Jun 16, 2006 6:59 am

    by JAWS » Wed Dec 27, 2006 8:26 pm

    Turner.. you SUCK!!!!! :)

    Joe
    Image
    '05 CRF450X,McClain suspension, Cycra Probends, Pastrana FMX Pro Tapers,BRP Sub mount & Scotts stabilizer.See carb sticky for more
  • Asmith
    Posts:14381
    Joined:Mon Apr 10, 2006 7:52 am

    by Asmith » Wed Dec 27, 2006 8:33 pm

    instigator wrote:Wait, let me get in on this!

    I think I wrote somethin about eventually people were gonna have problems installing Roosters!

    Damn, I wish I had more time to stir this pot! Maybe later tonite I can get back to the boards!!

    UNABIKERS RULE!!!!!!!!!!!!!!!!!!!!!!!!


    Sounds like someone sent you into the boards one too many times!!!!
  • User avatar
    paul turner
    Posts:7578
    Joined:Thu Sep 22, 2005 9:03 pm

    by paul turner » Wed Dec 27, 2006 8:50 pm

    JAWS wrote:Turner.. you SUCK!!!!! :)

    Joe



    At Best.

    paul #1
    If you ain't crashin', you ain't ridin' :-)
    Image
  • User avatar
    instigator
    Posts:469
    Joined:Tue Feb 28, 2006 9:57 pm

    by instigator » Wed Dec 27, 2006 10:14 pm

    ~ wrote:
    instigator wrote:Wait, let me get in on this!

    I think I wrote somethin about eventually people were gonna have problems installing Roosters!

    Damn, I wish I had more time to stir this pot! Maybe later tonite I can get back to the boards!!

    UNABIKERS RULE!!!!!!!!!!!!!!!!!!!!!!!!


    Sounds like someone sent you into the boards one too many times!!!!


    Good one! :? I guess? :roll:

    Now for the good news, I just picked up a "like new" Yoshi TCR pipe for the new 250x for $150.00. I am totally stoked!

    Black UNABIKERS have been ordered along with Twin Air, Napalm screw, JD Kit, smog block off kit and a whole bunch of t-shirts and sweatshirts!

    This 250X is going to rip from day one!! 8) 8) 8)
    06' 450X
    pro circuit T-4
    Jd Kit
    smog block-off
    the "works" for guards
    ___________________

    LET'S ROLL!
  • Asmith
    Posts:14381
    Joined:Mon Apr 10, 2006 7:52 am

    by Asmith » Wed Dec 27, 2006 10:22 pm

    Don't forget the CRF's Only Fuel screw!

    Oh, and up the pilot to a 42 right away.
  • User avatar
    instigator
    Posts:469
    Joined:Tue Feb 28, 2006 9:57 pm

    by instigator » Wed Dec 27, 2006 10:32 pm

    ~ wrote:Don't forget the CRF's Only Fuel screw!

    Oh, and up the pilot to a 42 right away.


    I have the fuel screw on order!

    Agent is the pilot change absolutely needed? And would you do the o ring mod on the linkage?
    06' 450X
    pro circuit T-4
    Jd Kit
    smog block-off
    the "works" for guards
    ___________________

    LET'S ROLL!
  • Asmith
    Posts:14381
    Joined:Mon Apr 10, 2006 7:52 am

    by Asmith » Wed Dec 27, 2006 10:38 pm

    instigator wrote:
    ~ wrote:Don't forget the CRF's Only Fuel screw!

    Oh, and up the pilot to a 42 right away.


    I have the fuel screw on order!

    Agent is the pilot change absolutely needed? And would you do the o ring mod on the linkage?


    Absolutely on both!
  • Smash

    by Smash » Wed Dec 27, 2006 11:40 pm

    ~ wrote:
    Smash wrote:Another radiator guard brand that doesn't fit....Hmmm.... Works Connections bolted right on....


    That's because they are made of silver spray painted cardboard... :lol:

    keep stirrin'


    That maybe, but I didn't need to use scissors to make them fit!!!
  • _06_crf_250r
    Posts:100
    Joined:Sat Sep 16, 2006 2:31 pm

    by _06_crf_250r » Thu Dec 28, 2006 5:55 am

    My works connection went on in about ten minutes
    06 crf 250r
    WB Carbon Pro
    AC subframe
    Pro Taper Contour
    Cycra powerflow fender
    Twin air filter
    works conn radiator braces
    works conn skid plate
    hammer head case saver
    renthal red 49tooth rear sprocket
    renthaul gold chain
  • User avatar
    SoylentGreen
    Posts:253
    Joined:Thu Jan 26, 2006 7:28 pm

    by SoylentGreen » Thu Dec 28, 2006 7:52 am

    ~ wrote:
    Four-Fifty-X wrote:It appears that the smog bolt in your picture is angled toward the back of the back. Look at mine: it looks parallel to the shroud mount bolt.


    Can you move your smog pump wire mount to the backside of the bracket and put a nut on it?

    Or move it to the backside and run the bolt from the backside?


    Yes you can, that is what I did on my UNI-BIKERS.
    Image
  • User avatar
    KevinM
    Posts:474
    Joined:Tue Mar 14, 2006 12:21 pm

    by KevinM » Thu Dec 28, 2006 8:10 am

    Instigator.. aka Kevin.. sounds like a great pipe deal.

    by the way...(question for everyone) which rad guards are the best?

    I need to put a pair on my already-bent 250X radiators.



    :D
    09 CRF 450R
    07 CRF 250R
    45 plt /175 main /JD Red-5th pos
    FS 2 trns
    05 CRF 250X
    42 Plt /162 Main /JD Red Needle- 5th pos
    CRFsOnly Fuel Screw 1-7/8 trns out (2 turns winter)
    TwinAir PowerFlo Kit /Opened Airbox /White Bros E2

Who is online

Users browsing this forum: No registered users and 4 guests