by Aussiecrf230 » Sun Jan 03, 2021 3:30 pm
Agree with Neil about centrifugal clutch.
You can try holding the brakes on firmly and see if it lets go.
Might need some revs at the same time.
Ensure the chain is not too tight as that can affect things I found in the past.
Even normal car and truck clutches can grow together over time and using the clutch pedal doesn't stop the drive. So not unexpected.
Ray
Australia
CRF230F 2004
C30F Power Up needle
Mains 132
Idle 45
2 turns out
Baffle out, Screens In
It starts,it runs,it gets to where all CRFs can get to without the valve or valve plate dramas