[StickyTeflon]

So i decided to add a UNI pod filter to my daughters 70 and the bike runs lean... to the point it stalls with quick throttle movement. So a decide to take a look at the carb and fatten it up. (I have two other full size bikes I've done my own jetting on) Anyway.. where is the dang air screw? the only outer adjustment screw i see is the idle screw that sets the slide stop. I also took the slide out to look at the needle and it only has one clip position?

This bike was bought new and is all stock parts.
What type/model # is this carb and what am i missing here?????

Thanks
Sean