Welcome to the site !!
Anything is possible , but considering the left side numberplate is almost flat compared to the right , you will have issues getting the muffler out far enough to clear the tire when the suspension travels , as it will most likely melt if it is directly pushed into it , you could use a heat gun and bend it , but you will not gain anything adding it , actually you will most likely lose power with it , as the backpressure from both mufflers will be a lot more than the single would ever restrict (which is why most everyone with a dual muffler bike wants to put aftermarket SINGLE side mufflers on them) the extra weight , along with the reduction in power , along with the bulk , yea looks cool , but functionally , its not worth it....