[motodreams]

White Brothers Aluminum Pro jetting for 06, at sea level, can anybody help? Tech support had a wide range.
Thanks for any help!

[Thomas Coker]

I am still running stock jets on a carbon pro with no issues at all. I am assuming your stock jets are not? I have been hesitant on messing with my jetting afraid that I might screw up a good thing. Then again I have alos wondered if I could get more out of it.
I am running Sonoco 110 race fuel. I am 900 ft above sea level.

Let me know if you find a jetting you like better.

[[email protected]]

can anybody help?

What's your bike doing anyway that you need to do some jetting ? What kind of symptoms are you experiencing ? Doug

[motodreams]

Gentlemen, thank you for your responses! The only thing I did was move the needle clip to the 5th position from top, all other jetting is stock. Bike runs like a top! Possibly when weather gets hotter I will go up on the maine jet, but for now all is good!
This was my first post to this site, AWESOME! happy riding to all.