Page 1 of 1

How to replace carb needle

Posted: Fri Jul 23, 2021 6:18 pm
by John L
My carb needle on my CRF100F is bent and I need to know how to install a new carb needle. I have removed the throttle cable and need to know how to install the V retainer clip (not the one on the needle) when assembling the throttle valve set.

Re: How to replace carb needle

Posted: Sat Jul 24, 2021 4:00 pm
by JimDirt
Welcome to the site !! \:D/

Are you talking the little Y or U shaped Retainer Clip that holds the needle in place shown in part #3 ???? , if so it should just sit down in the bottom and the spring holds it in place ... :-k 8-[

Image

Kind of like this
Image

Re: How to replace carb needle

Posted: Sat Jul 24, 2021 4:43 pm
by John L
Thank you, that is exactly what I needed to know.

Re: How to replace carb needle

Posted: Sat Jul 24, 2021 6:01 pm
by JimDirt
No problem ... Glad to help .. ;)