CRF's Only Forums

what if i got an exhaust for a bigger bike like a 150r or even a 250f and modified it to fit my xr100r would that work im just wondering

Not enough back pressure. You'd lose your low end.

really is there any thing to be done to get it back like adding back pressure

litleboy1020 wrote:really is there any thing to be done to get it back like adding back pressure

Yeah, use an exhaust made for your bike...

the exhausts made for my bike suck and are overly priced

litleboy1020 wrote:the exhausts made for my bike suck and are overly priced

http://www.xrsonly.com/content/index.ph ... &Itemid=77

yea thats 210 bucks i dont hav that money

litleboy1020 wrote:yea thats 210 bucks i dont hav that money

Do you think that an exhaust for a 150R or a 250R is gonna be less?

no if i buy a stock crf150r exhaust i can find some rly cheap

litleboy1020 wrote:no if i buy a stock crf150r exhaust i can find some rly cheap

Give it a shot. Worse case, put your stocker back on.

if i dont hav enough back pressure is there any way to add some

litleboy1020 wrote:if i dont hav enough back pressure is there any way to add some

Put a crease or bend in the header, weld some baffles in the can, anything to restrict some of the flow.

all right thanks if i can get the exhaust ill try it but the only problem is ill prob hav to cut my stock header off so it will fit to the motor

litleboy1020 wrote:all right thanks if i can get the exhaust ill try it but the only problem is ill prob hav to cut my stock header off so it will fit to the motor

??? What ??? Do you intend to cut your stock header and weld it to a larger pipe?
Or do you mean to say that you need to cut your stock pipe off so that you can experiment with a bigger pipe?

In either case if this does not work you will be spending the $200 on a new pipe (in addition to money you spent on you experiment) or you will be selling your pipe-less bike.

I commend you for wanting to try. I think it is a mistake for you to leave your self with no way to ride because you no longer have a working pipe.

if it doesnt work i can weld my old exhaust back together and why wouldnt it work its simple and heres my motto if it wont fit make it fit

then paint it