Page 1 of 1
190cc motor kit
Posted: Sat Jun 04, 2005 9:56 pm
by dan256
i here rumors about there being a 190 motr kit?
Posted: Sun Jun 05, 2005 4:53 pm
by Griz
From the Power roll web site
190cc PREMIUM KIT
66mm BORE, +4.0mm STROKE, 11.5:1 COMPRESSION
(includes $75 cam core charge)
With an awesome power increase of over 80%, this kit runs extremely strong throughout the rpm range. Perfect for MX or anywhere you want fistfuls of power at the twist of a wrist.
KIT INCLUDES:
BORE KIT #00336
4mm STROKE #16080
CAMSHAFT # 12756
CAM CORE #22756G
26mm CARB KIT #20535
EXHAUST SYSTEM #18351
REQUIREMENTS: Boring. Send in your crank for modification. Read our General Product Info page. Race Gas mix. Cam Core Exchange or Core Charge.
#KCRF150PREM CRF150 PREMIUM KIT -- $1,450.00
Posted: Sun Jun 05, 2005 7:43 pm
by dan256
oh thanks
Posted: Sun Jun 05, 2005 8:56 pm
by willflyforfood
There is a guy on TT who does 188 BBK's. I think it's $300 for piston, rings, sleeve, pin and gaskets.
Re: 190cc motor kit
Posted: Sat Jun 11, 2005 6:21 pm
by lilgirl
dan256 wrote:i here rumors about there being a 190 motr kit?
I have a 188cc kit from Coeshow (the TT fella). Unlike the Powroll one it's not a high compression kit so I can use regular gas, etc...
You need to buy the kit and then basically you split the cases and then have the cylinder and cases bored for the new sleeve. I also added a new Webcam cam.
It was great getting that extra bit of power. Didn't make any harder to start my bike, etc...
Posted: Sun Jun 12, 2005 10:46 pm
by dan256
thanks that sounds pretty sweet