Welcome to the site !!
Don't quote me on this , but I "think" they use the standard Honda 7/8" bend that has been on the CRF's for years , either way , you can take these measurements , compare them to your bars and it will tell you ....... Report back with findings , as it might help someone else out .....
Renthal 971
width= 802mm - (appx.) 32.25in.
height= 99mm - appx. 3 7/8in.
rise = 65mm - appx. 2 9/16in.
clamp width = 200mm - appx. 7 7/8in.
sweep/pullback = 54mm - appx. 2 1/8in.