Mapping switch
  • BAZ01
    Posts: 3
    Joined: Sat Feb 22, 2020 12:13 pm

    Mapping switch

    by BAZ01 » Sat Feb 22, 2020 12:22 pm

    Hi, Can anyone help please. Just got a 2016 crf250r the mapping switch was not working so I replaced it but it still doesn't work. The switch lights up when you first start it and goes out after a few seconds and than that's it. Has anyone come across this problem before ?
  • User avatar
    JimDirt
    Posts: 4406
    Joined: Sat Nov 25, 2006 6:31 pm

    Re: Mapping switch

    by JimDirt » Sat Feb 22, 2020 3:55 pm

    Welcome to the site !! \:D/

    When you start the bike the switch IS supposed to go out after a few seconds and not flash any more ..... are you saying when you try to select a specific MAP it does nothing ??? :-k , as what you are describing sounds normal functioning to me ... 8-[

    Image
    2020 CRF450R
    2006 CRF450X
    Image
    Weiser , Idaho
  • BAZ01
    Posts: 3
    Joined: Sat Feb 22, 2020 12:13 pm

    Re: Mapping switch

    by BAZ01 » Sun Feb 23, 2020 3:39 am

    Hi
    There is a second switch on the right hand side of the bars which is blue, It lights up blue on start up and goes out after a few seconds. You should be able to select 1 of 3 maps and it should flash 1 to 3 times when selected but it doesn't.

    Thanks for the reply.
  • BAZ01
    Posts: 3
    Joined: Sat Feb 22, 2020 12:13 pm

    Re: Mapping switch

    by BAZ01 » Sun Feb 23, 2020 5:21 am

    Hi Again.

    Problem solved, Idle speed was slightly to high and it would not allow you to change maps. Once it was knocked down everything works fine.

Who is online

Users browsing this forum: No registered users and 3 guests